MH 01.1 – Centrifugal Pump Demonstration Unit

The Centrifugal Pump Demonstration unit makes it possible to carry out a range of operations, either for the start-up or the operation itself of a pump station.

Download PDF
Description
The study of how a single pump works is available through the following coursework and laboratory experiments:
    • Study and production of the centrifugal pump characteristic curve.
      •  Head-flow  (H-Q).
    • Modification of the operation point by varying the settings of the pump installation.
      • Adjusting the discharge valve.
The pump is equipped with a transparent volute to provide a clear view of the whole operation process.
Learning Objectives
    • Study and production of the centrifugal pump characteristic curve.
      •  Head-flow  (H-Q).
    • Modification of the operation point by varying the settings of the pump installation.
      • Adjusting the discharge valve.
Technical Data
Pump:
    • Centrifugal pump Maximun high: 9m.c.a. Maximun flow: 123 L/M.
Cylindrical circulation tank:
    • Transparent tank Volum : 15L
Pressure indicators:
    • Aspiration site: 0 a 2 bar, Suction site: -1 a 1 bar.
Rotameter:
    • Range: 0 a 166 LPM.
Supplied with con:
    • Operations and experiments manual, with the completed description of the equipment, resume of the theory experimental process and results of the usual experiments.
OPTIONAL:
Data acquisition system and software.
With the electronic data acquisition module you can read in electronical displays and it includes a USB conection  to a computer with software.
It includes the next digital instrumentation:
    • 3 digital indicators.
    • 1 electronical caudalimenter.
    • 2 pressure sensors.
Requirements
  •  Power Supply: 230V/50Hz (more available).
  • Water supply and drainage system.

Related products

This post is also available in: ES